HyperTeamsEvery job you hand to Claude,
on one screen
Like delegating to several people at once, you hand Claude several jobs and see how far each got and what it cost. We deliver it installed, with outside access already set up.
경쟁사 5곳 요금제 페이지 정리해줘
5곳의 요금제를 표로 정리했습니다. 지난달과 비교해 2곳이 가격을 올렸고, 1곳은 무료 구간을 없앴습니다.
지난주 실적 데이터로 보고서 초안 써줘
핵심 지표 4개를 앞에 배치해 초안을 만들었습니다. 그래프 자리는 표시만 해 두었습니다.
설문 응답 500건 항목별로 분류해줘
신제품 소개 글 초안 3개 써줘
톤이 다른 초안 3개를 준비했습니다. 각각 도입부를 다르게 잡았습니다.
고객 안내 문서에 설치 절차 추가해줘
준비물, 설치, 첫 실행 세 단계로 나눠 정리했습니다.
로그인 화면 글자 대비 기준 맞춰줘
What actually changes
Handing the work over is the easy part. Keeping track of it is not.
Juggling separate windows
- Time it takesOne has to finish before the next can start
- ProgressYou open each window to see where it got to
- Finished workYou have to remember which ones are done
- Past workIt goes when you close the window
- CostIt is hard to tell what you have spent
- Away from the deskYou have to be at that computer
Watching it in Harness
- Time it takesThey run side by side, and the next one starts the moment one ends
- ProgressStatus and a summary of the answer are visible in one list
- Finished workFinished work is marked, and what you haven't read stands out
- Past workEvery conversation is saved and can be reopened later
- CostCost per job sits next to what is left on your account
- Away from the deskCheck from your phone and add the next instruction
Several jobs, one screen
You don't wait for one to finish before starting the next. Like splitting work across several people, hand over five and all five are running.
Hand over several at once
Register the folders you work in and give out several jobs together. Nothing waits on anything else, so the whole batch takes as long as its slowest job.
Watch it happen
You see the answer as it is written. Everything is saved, so you can reopen it later.
Queue the next one
Add your next instruction while a job is still running and it starts as soon as that one ends — no gap while you check in and type again.
Cost and usage
See what each job cost and how much is left on your account, in one place.
5곳 중 3곳까지 확인했습니다. 요금 구간이 서로 달라 표로 맞추는 중입니다.
확인 중 · A사, B사 요금제 페이지
정리 중 · 비교표
Turn the result into a link
What you produce gets a web address you can open right away. We set up the address and who may see it during setup.
Publish it as a link
An address for viewing the result is created automatically, and you can choose the name it uses.
Access control per link
Leave it open, put a password on it, or keep it to yourself. To share, you just pass along the password.
Survives a restart
Turn the computer off and on again and the addresses you published come back.
Everything after you hand it over
Opening and adjusting the result, and scheduling the work that repeats — all on the same screen.
Scheduled runs
It runs at the time you set. Have it gather material every morning and simply check the result when you get in.
Edit documents and files
Open the result and edit it right there. No downloading it first.
Change history
What changed and when is kept on record.
Connect other tools
Hook up the services and material you already use. We wire up the connections you need during setup.
Anytime, anywhere
No fiddly network settings. We connect outside access for you during setup.
Reach it from outside
Get to your computer's control panel from outside the office without touching your router or firewall.
On your phone
We install it to your home screen like an app. Check progress and add instructions while you are out.
Simple to start and stop
Everything it needs starts together and stops together. No multi-step routine each time.
From installation to outside access, we build it for you
You just use it. It is delivered with all four steps already done.
- 01
Review your environment
We go over which computer to build on and the kind of work you want to hand over.
- 02
Install and configure
We install the control panel, register the folders you work in, and match the defaults to your setup.
- 03
Set up access from outside
We connect it so you can reach it yourself from outside the office, and install it to your phone like an app, with a password already in place.
- 04
Hand it over
We show you how to give instructions, review results, schedule runs, and share output — on the real screen.
It stays on your computer
What you work on never reaches our servers.
Kept on your machine
Your instructions and results stay on your computer. The only thing leaving it is the question going to Claude.
Nothing extra to pay for
It uses the Claude account you already have. There is no separate developer key to obtain.
Protected by a password
The control panel is locked behind a password. No one gets in without signing in.
Before we build it
If these three are in place, we can build it.
The computer has to be on
It runs on your computer. Scheduled runs and outside access only work while that machine is awake — close the laptop lid and they pause until you open it. We suggest building on a computer you leave running.
You need Claude installed on a computer
This sits on top of Claude installed on a computer, not the one you use in a web browser. It uses the account you already have.
Reaching it from outside needs a web address
Reaching it from outside, or sharing results as links, needs one internet address. We help you register it in your own name. If you only use it inside your office, you don't need one.
Common questions
What people most often check before commissioning a setup.
Can I use it if I'm not a developer?
Yes. People use it to hand over recurring work like research, first drafts, and tidying survey data, then just check the result. The control panel is a list you read and a box you type instructions into — there is not much to learn.
Do I still need a Claude plan?
Yes. Harness is a control layer on top of the Claude you already use. You do not need a separate developer key, though — it uses your existing account.
Do I have to install it myself?
No. We build it for you. It is delivered installed, with outside access and the initial configuration already done.
Can I get help if I get stuck?
Yes. The Harness system we build comes with one year of free technical support. If you have a question, just reach out to us. What you create yourself is supported separately, for a fee.
Do I get the source code?
No. It is a commercially licensed product and the source code is not provided. We install it ready to use.
Does my material leave my computer?
Your instructions and results stay on your computer. The only thing leaving it is the question going to Claude.
One year of free technical support
The Harness system we build comes with one year of free technical support. If you have a question, just reach out to us.
What you create yourself is supported separately, for a fee.
Several jobs, one screen. All of it on your own computer.
Considering a setup?
Tell us what you want to hand over and which computer to build on, and we will walk you through scope and timing.